The Article About #Corrosion - Improving #Reliability by facilitating Application Development

We At www.inventorygain.com or www.inventory-deal.com  Products have

Longer usage life = Longer durability, less maintenance, less disruption and at the end a BETTER bottom line to the End User.

WHY CAN'T OTHER MANUFACTURERS OR OTHER SOURCING GROUPS FAIL TO PROVIDE SUCH SERVICES?

An Adapter, brass fittings or  connectors are used for conducting flow of gases or fluids, Most #manufacturers or Portals simply offer standard off shelf products, which may not be suitable for the application.

Typically, these manufacturer do not ask or have the capacity to suggest the right kind of plating needed to avoid corrosion. Corrosion is the biggest factor in the degradation of a fittings, which means the #Hydraulic system has to be shut down and dismantled, if proper plating is not applied, even if it is applied Proper plating thickness is not considered.

HOW DO WE DO IT?

At www.inventorygain.com or www.inventory-deal.com, a customer can specify the usage #environment and our expert #Engineers and Technical group can suggest the correct plating and plating thickness to prevent premature corrosion.

Thus improving Reliability R = 1- failure ( reducing the probability of failure).

Our engineers facilitate the required salt spray tests to validate the to be recommended plating type and thickness, before it is presented to the Customer.

Again www.inventory-deal.com or www.inventorygain.com is a Key FACILITATOR in design, development of components based on an #Application and we take the PAIN AWAY from the end user.

An Article Related to the Valves and Its Mechanism.

Valves:

Valve is a term derived from Latin word Vulva, which is nothing but moving parts of the door. A door regulates entry at any place or system, like wise Vulva or Volvre regulates the flow of fluids and gases through parts of hydraulic or pneumatic system. Valves are part of the fitting family, A fitting with an improvised capability to regulate flow of Fluid or Gas becomes a Valve.

Valves can be classified based on their actuation Hydraulic, Pneumatic, Manual , Solenoid and Motor valves. Valve has the following contents

1.Casing.
2. Ports.
3. stem.
4. Actuator.
5. Disc.
6. seat.
7. Gaskets.

Port: It is nothing but inlet and outlet of a valve, it is basically openings of a casing or body where the fluids or gases can enter or leave. A valve can be dual ported or even multi ported

Casing: It is nothing but Body of the valve .

Stem: It transmits motion from Handle to controlling device or disc.

Actuator: It controls the valve activity out side the valve body, it could be automatic and remotely controlled.

Gaskets: They are used to provide seal and prevent  fluid or gas leakages in the valves.

Seat: It functions in providing a tight seal to the disc, when a valve is shut the disc is in contact with the seat.

Disc:  It is the actual action maker of the valve, it is the real vulva which regulates the flow of fluids and gases.

Valves can be classified based on the type of discs, mechanism such as brass ball valve, butterfly valve, check valve, relief valve.Valves are rated based on their maximum temperature and pressure and this factor determines the material that needs to be used for a particular valve.

we at www.inventorygain.com do estock, supply and design valves when needed based on a specific application. We are also capable to facilitate the design of intelligent valves which obviously have actuators which are automatically or remotely operated.